120g @ 5%
PlasmaBlock® Air Cooled

Overview

A staple in the PlasmaBlock® line yet contains all the durability and features of the newer models. Available in two different mounting heights and with a Gen1 or Gen2 ozone block. The ozone generating blocks are available as a component. Air-cooled and power-Efficient. 1.5 lbs/day at 9.2% and 3 LPM : 8 lbs/day at 4.7% weight and 30 LPM (Oxygen or Concentrator).

For added application information, see the PlasmaBlock® Application Guide manual.

Models available

Refer to - Configuration Options Summary Sheet

Silent, Rugged, Reliable, Cost-effective, Compact and Light Weight, Ceramic, Air-cooled and power-Efficient.
1.5 lbs/day at 9.2% and 3 LPM : 8 lbs/day at 4.7% weight and 30 LPM (Oxygen or Concentrator).
No exposed high-voltage safety hazards.
Precise ozone control using Pulse Density Modulation (PDM) via potentiometer, 4/20ma or 0-10vdc.
Precise Linear Control with Turn-down to 1%.
Useful pressure range: 5 – 100 psi.
Now available with PlasmaVIEW ® software.

Front Right
Rear Left
Rear Right
Front Left
Front Left Air Flow
Rear Right Air Flow
Composit
Performance Graphs Legend
gr per hr 5psi
gr per hr 10psi
gr per hr 15psi
gr per hr 20psi
gr per hr 50psi
gr per hr 75psi
gr per hr 100psi
wt vs power 5psi
wt vs power 10psi
wt vs power 15psi
wt vs power 20psi
wt vs power 50psi
wt vs power 75psi
wt vs power 100psi
120g Gen1E 10psi
120g Gen1E 20psi
120g Gen2 10psi
120g Gen2 20psi
Side
Top
DAT210 Set Power Point
DAT210 Start Button Sweep
DAT210 New Profile Procedure
DAT210 Normal Running
DAT210 LED Fault Indicators
DAT210 Connection Safety Considerations
DAT210 On Delay Timer
Fuse and Power Supply Testing
IGBT and Diode Bridge Testing
16 Pin Kit Testing
DAT210 Firmware 3 1
SSD110 Tuning
Installation Operation
DAT210 Installation Operation
DAT210 Quick Start
Dimension Drawing
How to read the performance graphs
PlasmaBlock Performance Specs (heat dissipation, current, ozone output)
Spec Sheet

Product Details

All high voltage is safely contained completely within the Plasma Blo3ck®, thereby eliminating shock hazards and dirt buildup which can cause dangerous flashover. High-voltage wiring is booted and all metal grounded.
Advanced design eliminates the possibility of ozone leakage from the body or fittings. The only ozone leak possible is at the customer-tightened ozone fitting. All non-metal materials are ozone rated.
Military grade conformal coating eliminates problems associated with condensation and mold as well as greatly retarding damage caused by accidental ozone exposure.
Directly installable by UL 508a panel house.
Micro Channel® design results in high concentration, reduced high-voltage levels, and more efficient operation. Requires concentrator or bottle feed of at least -60°F dew point, filtered, positive-pressure oxygen. Materials in the gap are ceramic and aluminum.
Ideal for ‘over-the-road’ applications. Instant-ON ozone production -- no warm up time.
Precision-machined aluminum block eliminates inefficient hot spots and facilitates operation at high pressures, as well as vacuum ride through. Only 1 psi drop with 20 LPM flow. As with any cell, the most predictable performance occurs in the positive-pressure domain. Maximum pressure 98 psi , certified by UL at 5X rating.
Ozone level automatically controlled to ± 1% from 85 to 130vac; or 170v to 260vac, depending on model.
Pre-mounted, seasoned and tested package sub-system, which includes cell, transformer, inverter and fan. Design uses the finest quality material and machining for maximum performance and efficiency.
The Inverter is a reduced-power version of PTI’s popular SSD110. All control and interface features of the SSD110 are available in this product.
23 kHz operating frequency for silent operation.
Line voltage 240v (Standard), 50/60hz.
Inlet 3/8", Outlet 3/8”; both Stainless Compression Fittings are standard; 1/4” or 1/4” NPT on request
Pre-seasoned, calibrated and pre-adjusted to customers’ individual performance needs. Ready to install. Rigorous 100% performance and burn-in tests of all electricals are conducted to ensure the highest level of product quality, reliability and consistency.
There is an inherent pressure drop associated with each Plasma Block. This can vary depending on the desired flow. Verification of the outlet pressure, at the desired flow, of the Plasma Block is crucial in order to prevent a negative pressure drop in the Plasma Block. This will damage the Plasma Block internals and is not a warrantied repair.

Configuration options

PTI will set up and tune units to the customers desired specifications.

Oxygen pressure - (5 - 98 psi) (UL 5x rated)
Oxygen flow liters/minute - ( .2 - 40 Lpm) or equivalent SCFH
Heat load btu/hr = 3400
Inlet fittings (none, 1/4", 3/8", 8mm, 10mm, other)
Outlet fittings (none, 1/4", 3/8", 8mm, 10mm, other)
Weight Lbs (Kg) : 40.8 (18.57)

DAT210 is the standard control circuit board for this unit.